REL-MR-230AC/21HC AU

Extract from the online catalog     REL-MR-230AC/21HC AU Order No.: 2961529 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2961529   Pluggable miniature relays, with power contact for high continuous current and additional hard gold plating, 1 PDT, input voltage 230 V AC   Product notes WEEE/RoHS-compliant since: 07/27/2006 Commercial data EAN 4 017918 937928 sales group G084 Pack 10 Pcs. Customs tariff 85364900 Gross weight in pieces 0.016075 KG Net weight per piece 0.015 KG Catalog page information Page 284 (C-7-2013) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Dimensions Width 12.7 mm Height 29 mm Depth 15.7 mm PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 1 / 6 Aug 13, 2014 REL-MR-230AC/21HC AU Order No.: 2961529 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2961529 Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 230 V AC Typical input current at UN 3 mA (at 50 Hz) 2.5 mA (At 60 Hz) Typical response time 3 ms ... 12 ms (depending on phase relation) Typical release time range 2 ms ... 9 ms (depending on phase relation) Coil resistance 32500 Ω ±15 % (at 20 °C) Contact side Contact type 1 PDT Contact material AgNi, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV (at 10 mA) Maximum inrush current 50 mA Min. switching current 1 mA (at 24 V) Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, AC15) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 12 V (at 10 mA) Limiting continuous current 16 A Maximum inrush current 15 A (300 ms) Min. switching current 10 mA (at 12 V) Interrupting rating (ohmic load) max. 384 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 4000 VA (for 250 V AC) PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 2 / 6 Aug 13, 2014 REL-MR-230AC/21HC AU Order No.: 2961529 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2961529 Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 2 A (at 24 V, AC15) 2 A (at 120 V, AC15) 2 A (at 250 V, AC15) General Test voltage relay winding/relay contact 5 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life 1 x 10 cycles Standards/regulations IEC 60664 7 EN 50178 IEC 62103 Pollution degree 3 Surge voltage category III Mounting position any Assembly instructions Can be aligned without spacing (> 70 °C ≥ 2.5 mm) Certificates / Approvals Certification cULus Recognized, VDE Gutachten mit Fertigungsüberwachung Certifications applied for: Certification Ex: PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 3 / 6 Aug 13, 2014 REL-MR-230AC/21HC AU Order No.: 2961529 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2961529 Additional products Item Designation Description 2833518 PR1-BSC2/2X21 Relay socket PR1..., for miniature power relay or miniature switching relay with 1 or 2 PDT or solid-state relay of same construction, 2/2 level design, screw connections, connection facility for input/interference suppression modules 2833521 PR1-BSC3/2X21 Relay socket PR1..., for miniature power relay or miniature switching relay with 1 or 2 PDT or solid-state relay of same construction, 1/3 level design, screw connections, connection facility for input/interference suppression modules 2833534 PR1-BSP3/2X21 Relay socket PR1..., for miniature power relay or miniature switching relay with 1 or 2 PDT or solid-state relay of same construction, 1/3 level design, spring-cage connections, connection facility for input/interference suppression modules Relay base Drawings Drilling plan/solder pad geometry a = pitch division 2.5 mm Diagram Operating voltage range PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Interrupting rating Page 4 / 6 Aug 13, 2014 REL-MR-230AC/21HC AU Order No.: 2961529 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2961529 Service life reduction factor with various cos phi Electrical service life Dimensioned drawing Circuit diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 5 / 6 Aug 13, 2014 REL-MR-230AC/21HC AU Order No.: 2961529 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2961529 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.com © 2014 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.com Page 6 / 6 Aug 13, 2014